Stone features add character and permanence that no other material matches. Colorado Springs homeowners face a key question: stone veneer or natural stone?
Types of Stone Veneer
Natural Stone Veneer (Thin Stone)
Real stone cut into thin slices, 3/4 to 1.5 inches thick. Authentic look and feel at a fraction of the weight, installed using mortar over most wall surfaces.
Manufactured Stone Veneer
Portland cement cast into molds mimicking real stone. High-quality manufactured veneer is difficult to distinguish from natural stone and is generally less expensive.
Quick Comparison
| Factor | Manufactured Veneer | Natural Thin Veneer | Full Natural Stone |
|---|---|---|---|
| Cost installed | $10-$20/sq ft | $25-$45/sq ft | $40-$90+/sq ft |
| Durability | 20-50 years | 50-100 years | 100+ years |
Does Stone Veneer Add Home Value?
Yes. Manufactured stone veneer consistently returns 90%+ of its installation cost in resale value, one of the highest returns of any exterior upgrade.
How stone veneer is installed
Both natural thin stone and manufactured stone are “adhered veneer”: they are stuck to the wall rather than stacked as full stones. A proper installation has a water-resistive barrier, metal lath, a mortar scratch coat, the stone set in mortar, and a weep screed at the bottom so water can escape. Skipping these layers is the main reason veneer fails, especially with our freeze-thaw winters. Over masonry or concrete, the stone can often be set directly on a clean, prepared surface.
Weight and structure
Thin veneer is light enough for most walls, fireplaces and columns without extra footings. Full-depth natural stone is much heavier and needs a footing or ledge to carry it, which adds cost.
Which works best where?
- Exterior walls and wainscots: either type; natural thin stone holds color best in strong sun.
- Fireplaces and chimneys: both work well on fireplace surrounds; check clearances and heat ratings.
- Outdoor kitchens and columns: natural stone for the most authentic look, manufactured for a lower budget.
- Areas that get wet often: choose a dense natural stone and make sure flashing and drainage details are right.
Frequently Asked Questions
Does manufactured stone veneer look fake?
High-quality manufactured veneer with varied textures and natural color variation looks authentic. Budget-grade veneer with uniform coloring can look artificial up close.
How long does stone veneer last on a Colorado home?
Quality manufactured veneer lasts 20-50 years. Natural thin stone veneer lasts 50-100+ years. Installation quality is the most critical factor.
Can stone veneer go over existing brick?
Often yes, if the brick is sound and clean. A mason will check the surface and may add lath and a scratch coat for a strong bond.
Does stone veneer need sealing?
Usually not. A breathable sealer can help in areas that get splashed or stained, but the wrong sealer can trap moisture.
Learn more in the advantages of stone veneer, or see our stone masonry and veneer services.
Conclusion
At Brick Block and Stone, we specialize in all stone installation types. Let us help you choose the right material for your project.
Request a Free Stone Feature Consultation in Colorado Springs
Need help with stone masonry in Colorado Springs?
Brick Block & Stone builds and repairs it every week. See our stone masonry services or request a free estimate.

